Routers supporting V5 Netflow Exports
Cisco
| Cisco IOS release | Models |
| 11.1CA, 11.1CC | Cisco 7200 and 7500 series, RSP 7200 |
| 12.0 | Cisco 1720, 2600, 3600, 4500, 4700, AS5800, RSP7000, 7200, uBR7200, 7500, and RSM series |
| 12.0T, 12.0S | Cisco 1720, 2600, 3600, 4500, 4700, AS5800, RSP7000, 7200, uBR7200, 7500, RSM, MGX8800RPM, and BPx8600 series |
| 12.0(3)T, 12.0(3)S | Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800, RSP7000, 7200, uBR7200, 7500, RSM, MGX8800RPM, and BPx8650 series |
| 12.0(4)T | Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500, 4700, AS5300, AS5800, RSP7000, 7200 uBR7200, 7500, RSM, MGX8800RPM, and BPx8650 series |
| 12.0(4)XE | Cisco 7100 series |
| 12.0(6)S | Cisco 12000 series |
Netflow Exports are also supported on Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). You may need to check whether version 5 is supported however as switches talk in version 7 by default.
More in-depth details of Netflow support can be found on the Cisco web site. This information was sourced from the Netflow Services Solutions Guide. This is a good place to look for detailed Netflow information.
Foundry Networks
(from the Foundry Networks website) NetFlow Export requires the Velocity Management Module version 1 (VM1). The feature also is supported in the NetIron Internet Backbone router, on Network Processor Architecture (NPA) Packet over SONET (POS) modules.
Others
Other router vendors have been contacted, but have declined to provide any information as to which models are supported. Please contact your local router supplier if you are unsure whether your particular hardware is supported.
© Gadgets Software 2001-2008